壁厚用英语怎么说
你知道壁厚用英文怎么说吗?下面来学习一下吧。
壁厚英语说法：
wall thickness
壁厚英语例句：
在冰水冷却的条件下，冷却时间与壁厚有以下的关系。
When chilled water is used to cool the mould, cycle time is related to wallthickness as follows.
ASSEL轧管机具有台肩集中变形、碾轧段壁厚增厚等特点。
The tube deformation characteristics on ASSEL mill are deformationconcentrating at shoulder and wall thickness in rolling zone increasing.
闭模锻造的尺寸一致性造成关键壁厚的完全控制，避免了铸造工艺中铁心移位造成的缺陷。
Dimensional uniformity of closed-die forgings results in positive control ofcritical wall thickness, eliminating deficiencies caused by shifted cores incastings.
高速离心铸造，组织致密，无砂眼、夹渣，表面光滑、壁厚均匀。
Centrifugal casting, compact structure, free from pinhole porosity and slag, smooth surface and even wall thickness.
在冰水冷却的条件下，冷却时间与壁厚有以下的关系。
When chilled water is used to cool the mould, cycle time is related to wall thickness as follows.
对于给定的SCH，当管道壁厚增大或不变时，外径随NPS编号的增大而增大。
For a given SCH, the OD increases with increasing NPS while the wall thickness increases or stays constant.
硬态和半硬态拉制管外径与壁厚之比不小于25者。
hard and half hard drawn tubes the ratio of outer diameter to wall thickness is no more than25.
将不同壁厚的微胶囊与同一显色剂均匀混合，涂布成片。
We mixed Microcapsules of different wall thickness and developer together, then spread the mixture over the film base.
玻璃体内冷冻冰(眼用)在冰水冷却的条件下，冷却时间与壁厚有以下的关系。
When chilled water is used to cool the mould, cycle time is related to wall thickness as follows.
通过研究各机架出口断面不同点的壁厚变化，得出减径后钢管横向壁厚分布不均，探讨了内六方缺陷产生的原因。
It was found that the transverse wall thickness distribution is nonuniform and that is the cause of hexagonal bore formation.
口模异型化设计在优化挤出吹塑中空工业制件壁厚分布中的研究与应用
Application Research of the design of allotype die on the optimization of the wall thickness distribution of typical hollow industry parts
得出了不同含量玻纤增强PP挤出吹塑制件的最小壁厚的参考值。
The minimum reference value of the wall thickness of GF/ PP products with different content of GF was obtained.
水冷导轨在使用过程中是有磨损的，一般水冷导轨的壁厚是2mm。
There will be attrition during the process of using water-cooled guide, generally the wall thickness of the water-cooled guide is2mm.
以基于泛函通用涡旋型线构成的变壁厚涡旋盘为研究对象，建立了以能效比为目标函数的结构参数优化模型。
A variable wall thickness scroll plate constituted by general scroll profiles based on functional theory was taken as the study object.
